![](images/spacer.gif) |
![Step 1](images/Technical/step1.gif)
Dilute a small amount of latex paint with water. In this example, Raw Umber and Black was used to keep a warm tone finish.
![Step 2](images/Technical/step2.gif)
Dampen [not wet] a cellulose sponge with the first paint mixture, scrubbing it into the surface. Before it dries, use a clean sponge to remove most of the color. Repeat the process if you feel you want a little more color. After you have the base color to your liking, allow it to dry fully, [at least one hour].
After the first color has dried, mix the second color to the same consistency and repeat the technique until you achieve the color balance of your liking.
|
![](images/spacer.gif) |
![Step 3](images/Technical/step3.gif)
Apply at least one coat of Zero Gloss to the surface.
|
![](images/spacer.gif) |